{"title":"Transmission Accessories","description":"\u003cdiv class=\"_MainContentTopFade_ihb90_2\"\u003e\n\u003cmeta charset=\"utf-8\"\u003eShop ZF 8HP and DCT transmission accessories for your conversion project. Explore oil pans and filters, output flanges and adapters, AWD-to-RWD conversion kits, breather upgrades and clutch emulators. Find supporting components for your transmission swap, and check each product’s specifications for transmission and vehicle compatibility.\u003c\/div\u003e","products":[{"product_id":"domiworks-8hp-billet-oil-pan","title":"DOMIWORKS 8HP Billet Oil Pan","description":"\u003cp\u003e\u003cstrong\u003eSTOCK DUE LATE SEPTEMBER 2026\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8HP Billet Oil Pan\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA direct replacement oil pan for the 8HP Transmission. Made out of a one-piece high graded aluminum and anodized black for the most exclusive and premium experience.\u003c\/p\u003e\n\u003cp\u003eIncludes oil pan, oil filter, gasket, bolts and our very own oil pan plug.\u003c\/p\u003e\n\u003cp\u003eThe pan is 7-8mm deeper then stock and holds more oil volume then OEM pan. (oil volume to be confirmed).\u003c\/p\u003e\n\u003cp\u003eIntegrated baffle design for improved oil volume control and flow. Mounting holes to hold the integrated oil filter in place.\u003c\/p\u003e\n\u003cp\u003eBeautifully cut exposing the serrated surface which has now come to be the DOMIWORKS design insignia. The serrated surface is not only design but also works to improve heat exchange cooling capacity.\u003c\/p\u003e\n\u003cp\u003eFeatures OEM gasket and oil filter which is availabe here in our store or any 8HP OEM parts reseller.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDOMIWORKS\u003c\/span\u003e aluminium 8HP Oil Pan plug (no integrated magnet due to it sits near a solenoid).\u003c\/p\u003e\n\u003cp\u003eFeatures four additional mounting holes if you want to mount a custom heat shield, air direction plates etc.\u003c\/p\u003e\n\u003cp\u003eIncludes all mounting hardware required.\u003c\/p\u003e\n\u003cp\u003eBosch temperature\/pressure sensor with connector and terminals is available as an option. (please email if you would like to add a sensor to your order)\u003c\/p\u003e\n\u003cp\u003eFits all 8HP Transmissions with the plastic oil pan, not just BMW also Dodge and other brands.\u003c\/p\u003e\n\u003cp\u003eA direct replacement to your plastic oil pan.\u003c\/p\u003e","brand":"Domiworks","offers":[{"title":"Default Title","offer_id":40452677763114,"sku":"22010005","price":1250.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/products\/IMG_4363_800x_dfffd22f-a3f6-4504-91a8-569d3e3e997e.webp?v=1669024882"},{"product_id":"domiworks-8hp-output-flange","title":"DOMIWORKS 8HP 1350 Output Flange","description":"\u003cp\u003e\u003cstrong\u003e8HP Output Flange for 1350 Yokes and Supra MK4 propshaft\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSTOCK DUE IN AUS OCTOBER 2026\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product replaces the cast original output flange with this billet-machined output flange, which accommodates the popular 1350 Yoke and Supra MK4 patterns.\u003c\/p\u003e\n\u003cp\u003eAn integrated tone ring if you want to have an external speed reference, comes as standard. There will be a speed sensor option together with newly developed rear mounting and crossmember products in the near future. \u003c\/p\u003e\n\u003cp\u003eInstallation is straightforward; no cutting of the output shaft center pin.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eWorks with SPICER #3-2-119 and equivalent yokes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eHere is the link for technical dimensions of the 1350 pattern.\u003cbr\u003e\u003ca href=\"https:\/\/www.dennysdriveshaft.com\/p2510_dana_spicer_3_2_119_flange_yoke_1350_series_.html?srsltid=AfmBOop7-p9mEKioO5mToefYOmvdajFFfQkMXIM6wIyB45S8urkwNKOV\" rel=\"noopener\" target=\"_blank\"\u003e1350 Technical dimensions\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMade out of SS2541 and have a clear surface treatment to prevent corrosion. NO LONGER AVAILABLE IN BLACK.\u003c\/p\u003e\n\u003cp\u003eComes with new bolts and a new center nut. Pilot included to perfectly center the Supra MK4 propshaft to this flange.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Domiworks","offers":[{"title":"No Supra Centre guide","offer_id":40452678549546,"sku":"22002003","price":595.0,"currency_code":"AUD","in_stock":true},{"title":"Add Supra centre Guide","offer_id":40452680777770,"sku":"22002003+SUPRAGUIDE","price":645.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/products\/8HP_OF_1_800x_78fef75f-e226-4a71-b41b-69d6d9ba9799.webp?v=1669025099"},{"product_id":"8speed-au-8hp-awd-to-rwd-conversion-adapter-kit","title":"8SPEED.AU BMW N57 B57 8HP AWD to RWD Conversion Adapter Kit","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNew design for 2026! Now includes billet mount bracket and mounts!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is our BMW 8HP xDrive to Rear Wheel Drive Output Adapter\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures dual transfer case patterns which means it fits both early and current design of the BMW 8HP transfer cases bolt pattern. ATC13-1 and earlier.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe adapter houses a bearing which supports the output flange and tailshaft forces which the xdrive boxes are not designed to encounter.  The output flange feature dual bolt pattens 1350 yoke and the supra MKIV Supra.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill Suit The Following BMW Transmissions:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e8HP70x N57 (1st gen)\u003cbr\u003e8HP75x B57 (2nd gen)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eThe AWD to RWD conversion kits includes:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8Speed.au AWD to RWD conversion adapter \u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003eNew output flange, featuring 1350 Yoke pattern and Supra MKIV tailshaft uni  pattern\u003c\/li\u003e\n\u003cli\u003eBillet transmission mount bracket\u003c\/li\u003e\n\u003cli\u003e2x 40mm anti vibration mounts\u003c\/li\u003e\n\u003cli\u003eFasteners for securing the adapter to the transmission\u003c\/li\u003e\n\u003cli\u003eFasteners for securing the tail shaft uni to the supplied output flange\u003c\/li\u003e\n\u003cli\u003eFasteners for securing the billet transmission mount bracket to the adapter \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNOTE: Last image is of the previous version adapter, it is just to demonstrate its application. Anything ordered in 2026 will be the latest design.\u003c\/p\u003e\n\u003cp\u003eIn stock for immediate dispatch.\u003c\/p\u003e","brand":"8speed AU","offers":[{"title":"Default Title","offer_id":40522172956714,"sku":"8SPAWDRWD","price":1790.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/8speedawd2.jpg?v=1770185989"},{"product_id":"hpr-8hp-breather-mod-kit","title":"HPR 8HP BREATHER-MOD KIT","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eHPR 8HP BREATHER MOD KIT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe HPR 8HP breather mod kit is designed to improve trans tunnel clearance by replacing the factory breather port on the 8hp transmissions. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in the kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAluminium plug for stock breather hole\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStainless steel press in barb fitting\u003c\/li\u003e\n\u003cli\u003eSilicone hose\u003c\/li\u003e\n\u003cli\u003eRemote mount breather\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHPR recommend removing the front cover of the transmission to make sure no debris is left inside after drilling the transmission. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0632\/2290\/7129\/files\/8HP_breather-mod_kit_installation_guidelines.pdf?v=1682412316\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eClick here for installation guide.\u003c\/a\u003e\u003c\/p\u003e","brand":"HPR","offers":[{"title":"Default Title","offer_id":40693172109354,"sku":null,"price":79.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/20230513_104152_400x_5bb30e75-2037-42c8-8ba6-89568cb4cf34.jpg?v=1698381490"},{"product_id":"hpr-gs7-dct-output-flange","title":"HPR GS7 DCT OUTPUT FLANGE","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHPR GS7 DCT OUTPUT FLANGE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis flange bolts directly to your DCT output-shaft, and enables you to use the common and beefy 1350 u-joint flange, or the Toyota or Nissan 4 bolt pattern\/pilot. \u003c\/p\u003e\n\u003cp\u003eCNC machined out of 4140 chromoly, thru hardened for ductility, and case hardened for high surface hardness. \u003c\/p\u003e\n\u003cp\u003eAfter the dual stage hardening process, its polished and Zinc coated black. \u003c\/p\u003e\n\u003cp\u003eComes with a pilot to perfectly centre the propshaft for all 3 variations. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMachined  speed pickup tooth integrated to the flange\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded with the flange\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e4x High tensile bolts\u003c\/p\u003e\n\u003cp\u003e4x Nord-lock washers\u003c\/p\u003e\n\u003cp\u003e1x Stepped pilot ring for Nissan and Toyota \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible 1350 yokes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSonnax T3-2-119A (Aluminum)\u003c\/p\u003e\n\u003cp\u003eDana_Spicer 2-2-1789 (steel) \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/OvLKs6WPOBM?si=l7ZfLtFwwhKmGasH\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"HPR","offers":[{"title":"Default Title","offer_id":40729888686122,"sku":null,"price":599.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/20230313_113355_400x_ae7ebf22-fb87-4ff8-b7f5-125b0c18f392.jpg?v=1699240449"},{"product_id":"new-genuine-bmw-8hp-oil-pan-filter","title":"Genuine BMW 8HP Oil Pan Filter 8HP45 8HP50 8HP70 8HP75","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eOriginal ZF 8HP oil pan \/ oil tray\u003c\/strong\u003e\u003cspan\u003e for transmission oil change, suitable for ZF \u003c\/span\u003e\u003cstrong\u003eGA8HP45\u003c\/strong\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cstrong\u003eGA8HP50\u003c\/strong\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cstrong\u003eGA8HP70\u003c\/strong\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cstrong\u003eGA8HP75\u003c\/strong\u003e\u003cspan\u003e automatic transmissions.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"8speed.au","offers":[{"title":"Default Title","offer_id":40735719948330,"sku":"1087298437","price":330.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/71Kyj5HIimL._AC_SL1500.jpg?v=1699425079"},{"product_id":"hpr-park-lock-delete-2-0","title":"HPR DCT PARK LOCK DELETE 2.0","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch1 class=\"product-title h3\"\u003eHPR PARK LOCK DELETE 2.0\u003c\/h1\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHPR park lock delete\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBeautifully CNC milled in high grade billet aluminium.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSuperior finish with our special production technique.\u003cbr\u003eAnodized black with laser printed torque specs for an easy install.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eComes with stainless steel bolt and lock ring.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"HPR","offers":[{"title":"Default Title","offer_id":40863955320874,"sku":null,"price":79.5,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/Final18.png?v=1703032020"},{"product_id":"8speed-au-clutch-emulator-master-cylinder-replacement-toyota-nissan-chassis","title":"8speed.au 8HP DCT Clutch Emulator -  Master Cylinder Replacement Toyota \u0026 Nissan Chassis","description":"\u003cp\u003eThis is the 8speed.au V2 clutch feel emulator. It is designed to bolt in place of the factory clutch master cylinder. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIt is supplied with a master cylinder replacement flange to suit specific chassis, rod, and clevis. \u003c\/p\u003e\n\u003cp\u003eV2 is a new, slimmer design allowing for even more manifold clearance than the original design.\u003c\/p\u003e\n\u003cp\u003ePlease note some vehicles will require a new clevis mount hole in the pedal. This can assist with the factory pedal brackets' bending. But also adjust the amount of throw the emulator provides. \u003c\/p\u003e\n\u003cp\u003e**We are no longer providing a linear sensor with the kit due to people requiring different sizes and styles. Most of the ones we installed used a 50mm linear position sensor from Haltech p\/n HT-011201. However any linear sensor from any supplier can be used. Depending on roll cage and how much dashboard you have left, you may require a longer or different style of sensor. \u003c\/p\u003e\n\u003cp\u003ePlease check the video below to see the emulator in action. \u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/6Q7x-VVuSfc\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"8speed.au","offers":[{"title":"Nissan S\/R (Non GTR) Chassis Raw","offer_id":41204849147946,"sku":"","price":845.0,"currency_code":"AUD","in_stock":true},{"title":"Toyota JZ Chassis Raw","offer_id":42099891568682,"sku":"","price":845.0,"currency_code":"AUD","in_stock":true},{"title":"Nissan GTR R Chassis Raw","offer_id":42099895828522,"sku":"","price":845.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/ClutchEmv2-1.jpg?v=1781063428"},{"product_id":"8hp-dct-output-flange-adapter-105-110mm-with-18mm-or-22mm-inserts-1350-yoke","title":"Domiworks 8HP \/ DCT OUTPUT FLANGE ADAPTER 105-110MM WITH 18MM OR 22MM INSERTS - 1350 YOKE","description":"\u003cp\u003e\u003cstrong\u003e8HP \/ DCT Output Flange adapter 105-110mm with 18mm or 22mm inserts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHere is our updated revision of our popular output flange adapter.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis new adapter now accepts both 105mm and 110mm PCD pattern. This new design now features steel inserts that easily can change from 105 to 110mm by just rotating them 180 degrees in their mounting hole.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eYou can select between 18mm and 22mm inserts depending on which version you have on your transmission. This means it covers both 8HP and DCT transmission.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eConverts the output flange from 3-hole hardy disc pattern to 4-bolt 1350 Yoke pattern.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMade of aluminium and anodized black. Stainless steel inserts for either 18mm or 22mm inserts.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIncludes all mounting hardware necessary.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAdapter is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e22mm\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethick.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWorks with SPICER #3-2-119 and equivalent yokes\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFits all BMW DCT Gearboxes with a 105mm or 110mm PCD on the output flange with 22mm inserts.\u003cbr\u003eFits all BMW 8HP Gearboxes with a 105mm or 110mm PCD on the output flange with either 18mm or 22mm insert.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eChoose the inserts version you would like to use. You can include both versions for a reduced price.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWe will soon post more information on which transmission has what configuration.\u003c\/p\u003e","brand":"Domiworks","offers":[{"title":"18mm","offer_id":41675166482474,"sku":"22002011+18MMADAPTERS","price":259.9,"currency_code":"AUD","in_stock":true},{"title":"22mm","offer_id":41675166515242,"sku":"22002011+22MMADAPTERS","price":259.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/IMG_6382_800x_f8ba1a89-6556-4de0-86fd-dd22cfcd5a76.jpg?v=1716788536"},{"product_id":"8hp-dct-8hp-output-flange-adapter-96mm-to-1350-yoke","title":"Domiworks 8HP \/ DCT 8HP OUTPUT FLANGE ADAPTER 96MM TO 1350 YOKE","description":"\u003ch1 class=\"ProductMeta__Title Heading u-h2\"\u003e8HP OUTPUT FLANGE ADAPTER 96MM TO 1350 YOKE\u003c\/h1\u003e\n\u003cp\u003eConverts the output flange from 3-point hardy disc pattern to utilize a 1350 yoke.\u003c\/p\u003e\n\u003cp\u003eSupra A90\/A91 uses the 96mm PCD on the output of the transmission.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMade of aluminium and anodized black for a premium feel and customer experience.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIncludes all necessary mounting hardware.\u003c\/p\u003e","brand":"Domiworks","offers":[{"title":"Default Title","offer_id":41771610669098,"sku":"22002005","price":265.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/IMG_7532_800x_17fec239-1e7f-42f6-81b5-eddc8c6c6b73.jpg?v=1718244463"},{"product_id":"dct-park-lock-delete","title":"DOMIWORKS DCT PARK LOCK DELETE","description":"\u003cp\u003e\u003cstrong\u003eDomiworks \u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003cstrong\u003eDCT Park Lock Delete\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePermanently unlocks the internal parking mechanism. Made of high graded aluminium, black anodization.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIncludes bolt and locking circlip.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFits all BMW DCT Gearboxes.\u003c\/p\u003e","brand":"Domiworks","offers":[{"title":"Default Title","offer_id":41919610912810,"sku":"12001001","price":79.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/PLD_1_2_800x_843a5262-6f56-47aa-b4fe-ceecba855237.jpg?v=1721614391"},{"product_id":"dct-oil-pan-plug","title":"DCT BILLET OIL PAN PLUG","description":"\u003cp\u003e\u003cstrong\u003eDomiworks  \u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003cstrong\u003eDCT Oil Pan Plug\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDCT aluminium oil pan plug. Direct replacement to our Billet DCT Oil Pan or the OEM pan.\u003c\/p\u003e\n\u003cp\u003eComes with integrated magnet and Viton o-ring.\u003c\/p\u003e\n\u003cp\u003eAnodized black for premium feel and experience.\u003c\/p\u003e","brand":"Domiworks","offers":[{"title":"Default Title","offer_id":41919660523562,"sku":"81004001","price":54.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/OPP_1copy_800x_4215053a-792b-4323-a929-e5b37f4b4ab2.jpg?v=1721617196"},{"product_id":"dct-billet-oil-pan","title":"DCT BILLET OIL PAN","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eDomiworks DCT Billet Oil Pan\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis is one of our masterpieces, a direct replacement oil pan for the DCT Gearbox. Made out of one-piece high graded aluminum and anodized black for the most premium experience.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe pan sits a few mm lower then stock and holds 25% more oil volume then OEM pan.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIntegrated baffle design for improved oil volume control.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSerrated outer surface to improve cooling capacity.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFeatures reusable Viton O-ring gasket, no need to change gasket if pan is removed,\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDomiWorks aluminium DCT Oil Pan plug with integrated magnet.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMounting boss to be able to mount the OEM magnet. Magnet is taken from OEM pan.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFeatures three mounting holes if you want to use OEM heat shields.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIncludes all mounting hardware required.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFits all BMW DCT Gearboxes.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIf parts are not in stock, lead time is about 8-10 weeks.\u003c\/p\u003e","brand":"Domiworks","offers":[{"title":"Default Title","offer_id":41919664455722,"sku":"12001003","price":995.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/DOP_1copy_800x_477de99a-38ef-46a4-a204-0415ebab52f2.jpg?v=1721617461"},{"product_id":"dct-billet-side-cover","title":"DCT BILLET SIDE COVER","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eDomiworks \u003c\/strong\u003e\u003cstrong\u003eDCT Billet side cover\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReplacement side cover made in high grade aluminum\u003c\/p\u003e\n\u003cp\u003eAnodized black for premium feel and experience\u003c\/p\u003e\n\u003cp\u003eUtilizing reusable Viton o-ring seal\u003c\/p\u003e\n\u003cp\u003eComes with all mounting hardware\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIf parts are not in stock, lead time is about 8-10 weeks.\u003c\/p\u003e","brand":"Domiworks","offers":[{"title":"Default Title","offer_id":41923215786026,"sku":"12001004","price":895.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/IMG_5435_800x_364be202-90a1-42f1-9971-92287d7315a6.jpg?v=1721694400"},{"product_id":"8hp-start-stop-accumulator-delete-kit-with-baffle","title":"8HP START STOP ACCUMULATOR DELETE KIT WITH BAFFLE","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eStart Stop Pump Delete with baffle plate\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a kit to remove and block the internal start stop pump that normally not is used when you are running a aftermarket transmission controller.\u003c\/p\u003e\n\u003cp\u003eThe internal start stop pump accumulates a oil volume to be able to supply oil pressure during a brief period of time during a stop start sequence when the transmission oil pump is not rotating. This function is only used on OEM vehicles.\u003cbr\u003eThis means the oil volume is no longer trapped and you can get rid of the pumps weight. More free oil volume and less weight.\u003c\/p\u003e\n\u003cp\u003eThe start stop pump acts as a baffle plate to stop oil traveling backwards and upwards. We have made a replacement baffle plate to prevent this behaviour.\u003c\/p\u003e\n\u003cp\u003eEasy install, remove the oil pump and insert the block off part and install with the included bolts.\u003c\/p\u003e","brand":"Domiworks","offers":[{"title":"Default Title","offer_id":42002718588970,"sku":"22010002","price":250.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/IMG_0031_800x_ba397f82-3503-46a1-a70a-2330e50e0128.jpg?v=1724031043"},{"product_id":"domiworks-8hp-low-profile-breather-cap","title":"Domiworks 8HP Low Profile Breather Cap","description":"\u003cp\u003e\u003cstrong\u003e8HP Low Profile Breather Cap\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLow Profile Breather Cap for the 8HP transmissions. A direct replacement of the blue plastic cap to gain as much space as possible if you have a narrow transmission tunnel.\u003c\/p\u003e\n\u003cp\u003eQuick and easy installation. Done in 60 seconds.\u003c\/p\u003e\n\u003cp\u003eMade out of aluminum, anodized black and laser engraved logo.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Domiworks","offers":[{"title":"Default Title","offer_id":42035050709034,"sku":"22010001","price":59.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/IMG_9357_800x_7743f578-1c46-4e53-99d7-104b1170da72.jpg?v=1725256450"},{"product_id":"bmw-n57-engine-8hp-perforamnce-billet-flexplate","title":"BMW N57 Engine 8HP Performance Billet Flexplate","description":"\u003cp\u003e\u003cstrong\u003eBMW N57 Engine 8HP Performance Billet Flexplate\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSteel flexplate machined from high quality hardened gear steel.\u003c\/p\u003e\n\u003cp\u003eCompatible with standard flex plate bolts.\u003c\/p\u003e\n\u003cp\u003eA good upgrade for high torque output engines when 8HP-swapping\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eany \u003c\/strong\u003eM50\/52\/54\/57\/S50\/52\/54 etc 8-bolt engine that is meant to be combined with a N57 8HP flexplate\/transmission.\u003c\/p\u003e","brand":"CanTCU","offers":[{"title":"Default Title","offer_id":42062190837802,"sku":null,"price":749.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/render.png?v=1726118966"},{"product_id":"dodge-8hp95-trackhawk-awd-to-rwd-conversion-adapter-kit-1350","title":"Dodge 8HP95 Trackhawk, AWD to RWD Conversion Adapter Kit - 1350","description":"\u003cp\u003e\u003cstrong\u003e8HP AWD to RWD Conversion for Dodge 8HP95 Trackhawk, Hellcat, TRX adapter kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDifficult to find a RWD Transmission with the right specification? Can you only find tons of AWD transmissions?\u003cbr\u003eWe are now following up on the success on the AWD to RWD adapter for the BMW transmissions and now offers the same adapter for the Dodge transmissions especially 8HP95.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eConvert your AWD transmission to RWD in 1 minute, a bolt on conversion kit with everything you need to make it RWD.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConfirmed fitment to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDodge Durango SRT Hellcat\u003cbr\u003eJeep Grand Cherokee SRT Trackhawk\u003cbr\u003eRAM 1500 TRX\u003c\/p\u003e\n\u003cp\u003eFits output axles with outer diameter 34.5mm and 43 spline teeth.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAdapter plates houses a high speed bearing together with a new output flange made of high strength steel SS2541, which holds a dual pattern to fit 1350 Yoke and the Supra MKIV propshaft. \u003cspan\u003eWorks with SPICER #3-2-119 and equivalent 1350 yokes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAvailable in two colors, natural and black anodizing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIntegrated support for crossmember bushings.\u003c\/p\u003e\n\u003cp\u003eWorks with SPICER #3-2-119 and equivalent yokes.\u003c\/p\u003e\n\u003cp\u003eHere is link for technical dimensions of the 1350 pattern.\u003cbr\u003e\u003ca href=\"https:\/\/www.dennysdriveshaft.com\/p2510_dana_spicer_3_2_119_flange_yoke_1350_series_.html?srsltid=AfmBOop7-p9mEKioO5mToefYOmvdajFFfQkMXIM6wIyB45S8urkwNKOV\" rel=\"noopener\" target=\"_blank\"\u003e1350 Technical dimensions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eEverything comes assembled, installed on the transmission in less then a minute.\u003c\/p\u003e\n\u003cp\u003eAdapter housing made out of high quality aliminium, anodized in a natural color to increase scratch resistance and give a premium customer experience. Output flange is made in high strength steel SS2541, same material as our flywheels and other hubs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe AWD to RWD conversion kits includes:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAWD to RWD conversion adapter\u003cbr\u003e- High speed RPM bearing\u003cbr\u003e- New output flange, features 1350 Yoke pattern and Supra MKIV propshaft pattern\u003cbr\u003e- Mounting hardware for the conversion adapter, output flange and crossmember bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note these are not stocked in Australia, allow 4-8 weeks for local despatch.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Domiworks","offers":[{"title":"Default Title","offer_id":42753546944554,"sku":"22005003","price":1945.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/IMG_8863-Edit_800x_c48dc7ba-21c0-444a-9dd9-00fd02e628c7.jpg?v=1745283189"},{"product_id":"bmw-8hp45-n55-tc-adapter-add-on","title":"BMW 8HP45 N55 TC Adapter add-on","description":"\u003cp\u003e\u003cstrong\u003eBMW 8HP N55 TC Adapter add-on\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is an add-on to our existing adapter kits to extended compatibility with the 8HP45 N55 transmission and torque converter.\u003c\/p\u003e\n\u003cp\u003eIts simply mounted on top of the existing N57 TC adapter or flywheel to be able to mount the N55 torque converter properly.\u003c\/p\u003e\n\u003cp\u003eMost of our kits can accept this add-on but there are a few exceptions,, we therefore\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eALWAYS\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eadvise to check with us before ordering to make sure it will actually works.\u003c\/p\u003e\n\u003cp\u003eFlywheel is not included in this price, for illustration purposes only!\u003c\/p\u003e","brand":"Domiworks","offers":[{"title":"Default Title","offer_id":43166147969066,"sku":"22012001","price":595.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/IMG_1544_800x_e51f33b4-40a6-41e1-8dc3-fe7cb895cc6d.jpg?v=1754643330"},{"product_id":"bmw-8hp45-n20-n26-tc-adapter-add-on","title":"BMW 8HP45 N20\/N26 TC Adapter add-on","description":"\u003cp\u003e\u003cstrong\u003eBMW 8HP45 N20\/N26 TC Adapter add-on\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is an add-on to our existing adapter kits to extended compatibility with the 8HP45 N20\/N26 transmission and torque converter.\u003c\/p\u003e\n\u003cp\u003eIts simply mounted on top of the existing N57 TC adapter or flywheel to be able to mount the N55 torque converter properly.\u003c\/p\u003e\n\u003cp\u003eMost of our adapter kits can accept this add-on but there are a few exceptions,, we therefore \u003cstrong\u003eALWAYS\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eadvise to check with us before ordering to make sure it will actually works.\u003c\/p\u003e\n\u003cp\u003eFlywheel is not included in this price, for illustration purposes only!\u003c\/p\u003e\n\u003cp\u003eThe N20\/N26 Torque converter has a curved mounting surface.\u003cbr\u003eThe N55 Torque converter has a flat mounting surface.\u003c\/p\u003e","brand":"Domiworks","offers":[{"title":"Default Title","offer_id":43460810866730,"sku":"22012002","price":595.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/IMG_1542_1600x_5cce2983-60a5-4566-9396-253387143430.jpg?v=1755398769"},{"product_id":"dodge-8hp70-75-ram-1500-and-ram-ecodiesel-awd-to-rwd-conversion-adapter-kit-1350","title":"Dodge 8HP70\/75 RAM 1500 and RAM Ecodiesel, AWD to RWD Conversion Adapter Kit - 1350","description":"\u003cp\u003e\u003cstrong\u003e8HP AWD to RWD Conversion for Dodge 8HP70\/75 RAM 1500 and RAM Ecodiesel \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDifficult to find a RWD Transmission with the right specification? Can you only find tons of AWD transmissions?\u003cbr\u003eWe are now following up on the success on the AWD to RWD adapter for the BMW transmissions and now offers the same adapter for the Dodge transmissions especially 8HP70 and 75 from RAM 1500 and RAM Ecodiesel with 23-spline output axle.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eConvert your AWD transmission to RWD in 1 minute, a bolt on conversion kit with everything you need to make it RWD.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConfirmed fitment to:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e8HP70 and 8HP75 from RAM 1500\u003cbr\u003e8HP70 and 8HP75 from RAM Ecodiesel\u003c\/p\u003e\n\u003cp\u003eDoes not fit 845RE\/850RE, even if the output shaft is the same it has a different depth and bolt pattern.\u003c\/p\u003e\n\u003cp\u003eFits output axles with 23 spline teeth.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAdapter plates houses a high speed bearing together with a new output flange made of high strength steel SS2541, which holds a dual pattern to fit 1350 Yoke and the Supra MKIV propshaft. \u003cspan\u003eWorks with SPICER #3-2-119 and equivalent 1350 yokes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIntegrated transmission crossmember support.\u003c\/p\u003e\n\u003cp\u003eWorks with SPICER #3-2-119 and equivalent yokes.\u003c\/p\u003e\n\u003cp\u003eHere is link for technical dimensions of the 1350 pattern.\u003cbr\u003e\u003ca href=\"https:\/\/www.dennysdriveshaft.com\/p2510_dana_spicer_3_2_119_flange_yoke_1350_series_.html?srsltid=AfmBOop7-p9mEKioO5mToefYOmvdajFFfQkMXIM6wIyB45S8urkwNKOV\" rel=\"noopener\" target=\"_blank\"\u003e1350 Technical dimensions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eEverything comes assembled, installed on the transmission in less then a minute.\u003c\/p\u003e\n\u003cp\u003eAdapter housing made out of high quality aliminium, anodized in a natural color to increase scratch resistance and give a premium customer experience. Output flange is made in high strength steel SS2541, same material as our flywheels and other hubs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe AWD to RWD conversion kits includes:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAWD to RWD conversion adapter for 8HP70\/75 RAM 1500 and RAM Ecodiesel\u003cbr\u003e- High speed RPM bearing\u003cbr\u003e- New output flange, features 1350 Yoke pattern and Supra MKIV propshaft pattern\u003cbr\u003e- Mounting hardware for the conversion adapter, output flange and crossmember bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePLEASE NOTE THESE ARE NOT KEPT IN STOCK IN AUSTRALIA. ALLOW 4-8 WEEKS FOR SHIPMENT.\u003c\/p\u003e","brand":"Domiworks","offers":[{"title":"Default Title","offer_id":43470696972330,"sku":"22005004","price":1695.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/IMG_2093-Edit_800x_214f7276-70ab-4480-b5e2-9b28a2d0163f.jpg?v=1755830993"},{"product_id":"dct-clutch-simulator-firewall-pedalbox","title":"DCT Clutch Simulator Firewall\/Pedalbox","description":"\u003cp data-start=\"127\" data-end=\"360\"\u003eIntroducing our latest innovation: the Clutch Simulator — designed to replicate the feel of a \"real\" clutch pedal. Supplied with built-in 5v analog CPS (clutch position sensor) for straightforward installation in your build.\u003c\/p\u003e\n\u003cp data-start=\"362\" data-end=\"543\"\u003eThis Clutch Simulator is compatible to setup with most control systems that support clutch functionality for DCT\/8HP transmissions, including popular solutions like Turbolamik and Maxxecu.\u003c\/p\u003e\n\u003cp data-start=\"545\" data-end=\"672\"\u003eThe unit features a robust, compact design crafted from high-quality anodized aluminum for maximum durability and protection.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMade in Sweden\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-start=\"674\" data-end=\"819\"\u003e\u003cstrong\u003eNOTE!\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWhen you set up (calibrate) your simulator to your gearbox controller, please leave some room from when clutch pedal is not pressed. Heat from enginebay and others does some slight pressure change (voltage rise about 0.1v at 80 celsius). So if you read ~0.5v when 0% pressed, set 0% to at least 0.8-1.0v. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"674\" data-end=\"819\"\u003e\n\u003cstrong data-start=\"968\" data-end=\"990\"\u003eFirewall\/pedal Mounting:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIncludes a m8 rod with clevis link and a mounting plate that fits most firewalls (with center-to-center distances between 62–53 mm). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"823\" data-end=\"843\"\u003eRemote Mounting:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eComes with a 3\/8-24 UNF fitting, allowing it to connect seamlessly as a slave cylinder after your main clutch cylinder. Also comes with a mounting bracket in stainless steel. Small m3 screw for bleeding.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePlease be aware:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eyou might need a \"help spring\" to correctly pull the pedal back. We've noticed some setups work great without one, but it seems to depend on your pedal's geometry and cylinder size. We're actively working on a fix to eliminate the need for an extra spring, but for now, adding a help spring is the easiest solution.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInlet thread: 3\/8-24 UNF female\u003c\/li\u003e\n\u003cli\u003eSensor thread: 1\/8 npt\u003c\/li\u003e\n\u003cli\u003eSensor power: 5v DC\u003c\/li\u003e\n\u003cli\u003eSensor output: 0.5-4.5v\u003c\/li\u003e\n\u003cli\u003eSensor range: 0-10 bar\u003c\/li\u003e\n\u003cli\u003eTotal height (with firewall bracket): 110mm\u003c\/li\u003e\n\u003cli\u003eBody height(bottom of body to top of cap): 85mm\u003c\/li\u003e\n\u003cli\u003eWidth:  35mm\u003c\/li\u003e\n\u003cli\u003eTotal length: 160mm\u003c\/li\u003e\n\u003cli\u003eLength (from firewall to end of body):125mm\u003c\/li\u003e\n\u003cli\u003eLength of rod (from firewall): 110mm + 40mm clevis\u003c\/li\u003e\n\u003cli\u003eWeight: 0.8kg\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1115\" data-end=\"1243\"\u003eElevate your driving experience with our Clutch Simulator — engineered for performance, versatility, and ease of installation- Here in Sweden.\u003c\/p\u003e","brand":"Domiworks","offers":[{"title":"Default Title","offer_id":43470740422698,"sku":null,"price":995.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/DCT_Clutch_simulator_svart_001-min_800x_993b545c-99fe-4d7b-8a06-dc29a805b340.png?v=1755834222"},{"product_id":"oem-toyota-vdj-flex-plate-complete-assembly","title":"OEM Toyota VDJ flex plate complete assembly","description":"\u003cp\u003eThis is a genuine Toyota flex plate assembly to suit 1VD engines. \u003cbr\u003e\u003cbr\u003eIt includes genuine Toyota counterweight, genuine Toyota flex plate, genuine Toyota compensator plate and 8 genuine Toyota bolts to complete the kit as found on the 200 series land cruiser.\u003cbr\u003e\u003c\/p\u003e","brand":"8speed AU","offers":[{"title":"Default Title","offer_id":43507280937002,"sku":null,"price":855.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/IMG-6509.heic?v=1756990656"},{"product_id":"8hp-transmisison-oil-filter-suit-billet-pans","title":"8HP Transmission oil filter - Suit Billet Oil Pans","description":"\u003cp\u003e\u003cstrong\u003eReplacement Oil filter for the 8HP Billet Oil Pans\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.8speed.au\/products\/hpr-8hp-billet-oil-pan\" target=\"_blank\"\u003eHPR 8HP Billet Oil Pan\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.8speed.au\/products\/hpr-8hp-thermostat-oil-pan\"\u003eHPR 8HP Billet Oil Pan With Integrated Thermostat\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.8speed.au\/products\/domiworks-8hp-billet-oil-pan\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eDomiworks Billet Oil Pan\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"HPR","offers":[{"title":"Default Title","offer_id":43548742549546,"sku":null,"price":79.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/oil_filter_8HP.png?v=1758173895"},{"product_id":"domiworks-8hp-billet-oil-pan-deep-high-volume","title":"DOMIWORKS 8HP Billet Oil Pan - Deep High Volume - Extra 3.1l","description":"\u003cp\u003e\u003cstrong\u003e8HP Billet Oil Pan - High profile (30mm extra depth)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf the DCT Oil pan is one of our masterpieces, this beast must be the bigger brother. A direct replacement oil pan for the 8HP Transmission. Made out of a one-piece high graded aluminum and anodized black for the most exclusive and premium experience.\u003c\/p\u003e\n\u003cp\u003eIncludes oil pan, oil filter, gasket, bolts and our very own oil pan plug.\u003c\/p\u003e\n\u003cp\u003eThis oil pan has a high profile with an extra\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e30mm depth\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eincreasing oil volume by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e3.1L. \u003c\/strong\u003eIncludes filter spacer neck to get the filter in the bottom, also two spacers to keep the filter in position.\u003c\/p\u003e\n\u003cp\u003eThis oil pan is designed for vehicle with high ground clearance and where the vehicle application is climbing or declining step hills, the extra oil volume gives you an advantage of not running out of oil in steep environments.\u003c\/p\u003e\n\u003cp\u003eIntegrated baffle design for improved oil volume control and flow. Mounting holes to hold the integrated oil filter in place.\u003c\/p\u003e\n\u003cp\u003eBeautifully cut exposing the serrated surface which has now come to be our design insignia. The serrated surface is not only aesthetics but also works to improve heat exchange cooling capacity.\u003c\/p\u003e\n\u003cp\u003eFeatures OEM gasket and oil filter which is availabe here in our store or any 8HP OEM parts reseller.\u003c\/p\u003e\n\u003cp\u003eDomiWorks aluminium\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eDCT\/8HP Oil Pan plug\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(no integrated magnet due to it sits near a solenoid).\u003c\/p\u003e\n\u003cp\u003eFeatures four additional mounting holes if you want to mount a custom heat shield, air direction plates etc.\u003c\/p\u003e\n\u003cp\u003eIncludes all mounting hardware required.\u003c\/p\u003e\n\u003cp\u003eBosch temperature\/pressure sensor with connector and terminals is available as an option.\u003c\/p\u003e\n\u003cp\u003eFits all 8HP Transmission with this type of plastic oil pan, not just BMW also Dodge and other brands.\u003c\/p\u003e\n\u003cp\u003eIf parts are not in stock, lead time is about 4-6 weeks.\u003c\/p\u003e\n\u003cp\u003eA direct replacement to your broken plastic oil pan.\u003c\/p\u003e\n\u003cp\u003eDoes not fit 8HP Hybrids or 90\/95 transmissions.\u003c\/p\u003e","brand":"Domiworks","offers":[{"title":"Default Title","offer_id":43663758589994,"sku":"22010007","price":1345.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/IMG_2936-Edit_800x_ef68c2fe-8e5e-4973-8a33-34ef10efbb1c.jpg?v=1759123629"},{"product_id":"bmw-8hp-billet-flexplate-for-bmw-n54-8-bolt-m50-m52-m54","title":"BMW 8HP Billet Flexplate for BMW N54 (8-bolt) M50 M52 M54","description":"\u003cp\u003e\u003cstrong\u003eBMW N54 8 Bolt Style 8HP Billet Flexplate\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUpgrade your standard flexplate with this high-quality uprated 8HP Billet flexplate. One billet piece flexplate with integrated starter ring gear.\u003c\/p\u003e\n\u003cp\u003eMade out of 4340 (SS2541) high quality steel, beautifully black oxidization surface finish. Laser engraved text and torque information.\u003c\/p\u003e\n\u003cp\u003e50% thicker then the standard N54 flexplate. Rated for serious power levels.\u003c\/p\u003e\n\u003cp\u003eStarter ring gear is EDM machined to give the precise gear tooth profile required.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement part to the N54 OEM 8 bolt flexplate.\u003c\/p\u003e\n\u003cp\u003eThis is the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eperfect match\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eif you want to mount a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e8HP45 N55\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edirectly to your BMW M50\/52\/54 engine. Use this flexplate for a bolt on solution of the N55 converter. Use the Domiworks Starter motor spacer for perfect engagment of the starter ring gear.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.8speed.au\/products\/bmw-m5x-s5x-8hp45-n55-starter-motor-spacer\" title=\"Starter Motor Spacer\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eStarter motor spacer\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePLEASE NOTE THESE ARE NOT KEPT IN STOCK IN AUSTRALIA AND WILL TAKE 3-4 WEEKS TO GET IN.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Domiworks","offers":[{"title":"Default Title","offer_id":43887852912682,"sku":"22013004","price":895.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/IMG_3338_800x_b46621c3-c68e-4e22-86dd-a2487cb83d44.jpg?v=1765166308"},{"product_id":"land-rover-8hp-awd-to-rwd-conversion-adapter-kit-1350-supra","title":"Land Rover 8HP AWD to RWD Conversion Adapter Kit - 1350\/Supra","description":"\u003cp\u003e\u003cstrong\u003eLand Rover 8HP AWD to RWD Conversion Adapter Kit - 1350\/Supra\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConvert your AWD transmission to RWD in 1 minute, a bolt on conversion kit with everything you need to make it RWD.\u003c\/p\u003e\n\u003cp\u003eFeatures Land Rover bolt pattern which normally has the ITC transfer case.\u003c\/p\u003e\n\u003cp\u003eAdapter plates houses a high speed bearing together with a new output flange made of high strength steel SS2541, same material as our flywheels and other hubs. Holds dual patterns to fit 1350 Yoke and the Supra MKIV propshaft.\u003c\/p\u003e\n\u003cp\u003eIntegrated support bracket to make it easy to adapt your crossmember.\u003c\/p\u003e\n\u003cp\u003eEverything comes assembled, installed on the transmission in less then a minute.\u003c\/p\u003e\n\u003cp\u003eMinimal build height, not extending the output axle more than absolutley necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe AWD to RWD conversion kits includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- AWD to RWD conversion adapter\u003cbr\u003e- High speed RPM bearing\u003cbr\u003e- New billet output flange, features 1350 Yoke pattern and Supra MKIV propshaft pattern\u003cbr\u003e- Integrated support bracket \u003cbr\u003e- Mounting hardware for the conversion adapterand output flange pattern\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eTHESE ARE NOT KEPT IN STOCK IN AUSTRALIA PLEASE ALLOW 4-6 WEEKS FOR DESPATCH\u003c\/span\u003e\u003c\/p\u003e","brand":"Domiworks","offers":[{"title":"Default Title","offer_id":44038723928106,"sku":"22005005","price":1595.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/IMG_3082_800x_af1ae700-e8bf-4ff7-b7f2-7619964785df.jpg?v=1770101386"},{"product_id":"toyota-1jz-2jz-ge-gte-billet-flexplate","title":"Toyota 1JZ\/2JZ GE\/GTE Billet Flexplate","description":"\u003cp\u003e\u003cstrong\u003eToyota 1JZ\/2JZ GE\/GTE Billet Flexplate\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is our own premium billet flexplate for those who think the OEM flexplate is not up for the job. This is a direct replacment to the OEM flexplate with increased thickness and stiffness, making it the ultimate OEM+ part.\u003c\/p\u003e\n\u003cp\u003eOne-piece design with integrated ring gear, dual pattern torque converter patterns (GE and GTE). Made out of high strength steel with black quench oxidization surface. Laser engraved text and logo. Increased thickness and stiffness compared to the OEM flexplate.\u003c\/p\u003e\n\u003cp\u003eSuitable for all of our 8HP Adapter Kits which requires a flexplate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePLEASE NOTE THESE ARE NOT KEPT IN STOCK IN AUSTRALIA AND WILL TAKE 3-4 WEEKS TO GET IN.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Domiworks","offers":[{"title":"Default Title","offer_id":44163179544618,"sku":"81010001","price":895.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/IMG_2371_800x_6aa73754-6ae7-4548-82c5-097965e08c2f.jpg?v=1773380098"},{"product_id":"8hp-dct-output-flange-adapter-105-110mm-with-18mm-or-22mm-inserts-cv-joint","title":"8HP \/ DCT Output Flange adapter 105-110mm with 18mm or 22mm inserts - CV Joint","description":"\u003cp\u003e\u003cstrong\u003e8HP \/ DCT Output Flange adapter 105-110mm with 18mm or 22mm inserts for CV Joint\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eConverts the output flange from 3-point hardy disc pattern to utilize a 6-bolt CV joint.\u003c\/p\u003e\n\u003cp\u003eThis new adapter now accepts both 105mm and 110mm PCD pattern. This new design now features steel inserts that easily can change from 105 to 110mm by just rotating them 180 degrees in their mounting hole.\u003c\/p\u003e\n\u003cp\u003eYou can select between 18mm and 22mm inserts depending on which version you have on your transmission. This means it covers both 8HP and DCT transmission.\u003c\/p\u003e\n\u003cp\u003eMade of aluminium and anodized black. Stainless steel inserts for either 18mm or 22mm inserts.\u003c\/p\u003e\n\u003cp\u003eIncludes all mounting hardware necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAdapter is \u003cstrong\u003e25mm\u003c\/strong\u003e thick.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAdapter is made for CV-Joint with \u003cstrong\u003e108mm\u003c\/strong\u003e outer diameter, \u003cstrong\u003e94mm\u003c\/strong\u003e PCD and \u003cstrong\u003eM10\u003c\/strong\u003e bolts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFits all BMW DCT Gearboxes with a 105mm or 110mm PCD on the output flange with 22mm inserts.\u003cbr\u003eFits all BMW 8HP Gearboxes with a 105mm or 110mm PCD on the output flange with either 18mm or 22mm insert.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note these are not kept in stock in Australia - Allow 4-6 weeks for shipment.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Domiworks","offers":[{"title":"18mm","offer_id":44259376070698,"sku":"22002012-22MMINSERTS","price":259.9,"currency_code":"AUD","in_stock":true},{"title":"22mm","offer_id":44259376103466,"sku":"22002012-22MMINSERTS","price":259.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/IMG_7529_800x_c6b7a8f3-4d33-4277-92f2-2e60614b54be.jpg?v=1776318920"},{"product_id":"bmw-n54-n55-flexplate-to-n57-torque-converter-adapter-kit","title":"BMW N54\/N55 flexplate to N57 torque converter adapter kit","description":"\u003cp\u003e\u003cstrong\u003eBMW N54 flexplate to N57 torque converter adapter kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo ease the conversion on a BMW N54\/N55\/S55 who wants to run a newer 8HP transmission but the torque converter doesnt fit on the N54\/N55 flexplate.\u003c\/p\u003e\n\u003cp\u003eWe have developed a kit with weld-in inserts to make life easier for you. No drilling required, use the included center guide together with your flexplate. Insert the weld-in inserts into the torque converter holes and weld.\u003c\/p\u003e\n\u003cp\u003eComes with center guide, 6x weld-in inserts and 6x M10x20 bolts.\u003c\/p\u003e\n\u003cp\u003eThis kits fits all the torque converters with the larger mounting PCD found on 45\/50\/70\/75 transmissions from N47\/B48\/N57\/B57\/B58 engines.\u003c\/p\u003e\n\u003cp\u003eCan be bought together with our N54 to N57 adapter plate.\u003c\/p\u003e\n\u003cp\u003eTHESE ARE NOT KEPT IN STOCK IN AUSTRALIA PLEASE ALLOW 4-6 WEEKS FOR DESPATCH\u003c\/p\u003e","brand":"Domiworks","offers":[{"title":"Default Title","offer_id":44355594321962,"sku":null,"price":119.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/2510\/8778\/files\/IMG_5277_800x_b8e915f6-4a9e-47d7-a813-c86da3459e05.jpg?v=1778651324"}],"url":"https:\/\/www.8speed.au\/collections\/transmission-accessories.oembed","provider":"8speed AU","version":"1.0","type":"link"}